Product Application
Our led strip gluing machine Widely used in LED lighting modules, LED display, LED flood lights, LED soft and hard light strips, fluorescent lamps, wall washers, waterproof power supplies, resistors, capacitors, photo albums, and other products.
Introduction :
1. Working Area: 400x5000x30/80mm
2.Application products: LED flexible strip
3.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
4. Gear pump
5. Mix glue A & B more evenly; no more or no less for agent B.
Name: Fully Automatic Glue Dispensing Machine
Model: PGB-5100 Advised Glue: two-component silicone, epoxy, PU, etc.
Ratio: 1:1 to 10:1 adjustable
Glue Color: transparent
Glue Type: no additives inside
Application: LED flexible strip 5m long Machine
Type: special for LED Strip 5m
Tech Data:
1.Gluing Speed: 0.2-12g/S
2.Repeatability: +/-1%
3. Glue Ratio: 1:1 to 10:1 adjustable
4. Tank Capacity: 10L, 25L, 40L available
5. Size: L6000xW1200xH1500mm
6. Weight: 810kg
7. Power: 1.5-3kw, Voltage: 220V & 380V optional
8. Air Pressure: 0.5-0.65MPa ( 5-6.5kgf/ cm2 )
1. High ratio between the base agent and hardener, ( the most common ratio is 10:1);
2. Transparent.
3. Need to vacuum to remove the air bubble inside
4. Not easy to mix the two components evenly.
5. Running Path is long. Have special requirement on metering pump.
1. Gluing Effect: high evenness; can not be rugged;
2. High precision for mixing of glue A and glue B. ( Glue B can not be more or less than required quantity)
3. Thickness of Glue: must be suitable.
4. Position: the nozzle must focus on the middle of PCB bar.
5. Capacity must meet up the customer’s requirement.
III.Specification:
|
Model No:
|
pgb-5100
|
|
Mixing Ratio
|
100:100-10:100(1:1-1:10) Adjustable
|
|
Metering precision
|
±1%
|
|
Outflow speed
|
1g/sec-15g/sec
|
|
Mixing precision
|
±1%
|
|
Mixing mode
|
Dynamic mixing /Static mixing
|
|
Glue Viscosity
|
Lower than 20000 CPS(mPa·s)
|
|
Control mode
|
PLC + Touch Screen
|
|
Control system
|
Independent R&D
|
|
Measuring mode
|
Stepping motor/High-precision, wear-resistant,long-life Gear pump
|
|
Working voltage
|
AC 220V 50Hz/60Hz
|
|
Power requirement
|
3.55KW
|
|
Air pressure requirement
|
4.5-8KG
|
|
Machine Dimension
|
1500(L)*1200(W)*1500(H)mm
|
|
Weight
|
approx 260 KG
|
|
Work environment
|
Humidity: 20%~98%RH; Temperature: 0~+40°c
|
Suitable Material: For waterproof, adhesive, fixed two-component adhesive.
Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.
Applications:LED products ,Crafts,Electronic components
Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovoltaic inverter .etc
Application
